Image Alt

Shop

Vintage Surfboards, Surfing Memorabilia, and all things Surfing

SurfPaints Surfboard Paint – Fluro Colours – Customise your surfboard

$52.99

Surfpaints, surfboard paint, fluro colours set. Customise your surfboard. Surfpaints are water based, non-toxic and acrylic which has the best adhesions to fibreglass or foamie slick surfboards. The paint pens can be used anywhere and works great on every surf accessory including fins, leashes, skateboards and a whole lot of other items.

(se Description tab for full details and instructions)

2 in stock

SKU: SurfpaintsFluro Categories: ,

Description

Surfpaints, surfboard paint, fluro colours set. Customise your surfboard. Surfpaints are water based, non-toxic and acrylic which has the best adhesions to fibreglass or foamie slick surfboards. The paint pens can be used anywhere and works great on every surf accessory including fins, leashes, skateboards and a whole lot of other items.

Scan the QR code on the box for full instructions, or follow the below:

Step 1: Remove wax from surfboard with a sturdy wax comb – PURCHASE HERE. Generally, a good wax comb will get the wax off. However, if you live in a cold environment or find yourself with layers of old wax, then you may find it helpful to let the wax melt by placing the board (wax up) in direct sunlight for 3-5 minutes, depending on how hot it is. Another chemical free alternative to assist with wax removal, is to use a hair dryer, and blow hot air on the wax until it starts to melt. If you have a brand new surfboard you can skip this step and move onto step 2.

Step 2: Once the majority of wax has been removed with a wax comb then it is time to remove the last remaining wax bits and visible dirt. Remove the last bit of wax using a steel wool medium grade. The steel wool is great for removing the last remaining bits of wax and any other grease or dirt on the board. It makes cleaning the board effortless and you’ll be amazed at how well it works. The steel wool should be used by rubbing it up and down to clean all of the surfboard until there is no visible wax or grease remaining. If you have a brand new surfboard, then it is still very important to clean the surfboard from grease and dirt that lies on the surface. Brand new surfboards usually contain finger marks and dust that has been collected via transport and storage.

Step 3: Surfboards need to be lightly sanded before application of paint pens. The sanding creates these rough ridges on the board that provides better adhesion for the paint to bond to the surfboard. If the board isn’t lightly sanded, it is at risk of flaking off. Lightly sanding a board is crucial for the longevity and flow of paint pens on the board. Not sanding a board before painting is usually the contributing factor of paint jobs peeling off and streaky paint. The sand block is medium grade which provides you with an easy way to sand the area without dealing with electric cords or thin sand paper sheets that always seem to rip and be hard to grip. Sand the surfboard by moving the sand block in a circular motion until you start to see fine, white, powdery mixture come off the surfboard. After sanding the area, wipe down with a paper towel or rag to clear the area of sanding residue. Well done! All the boring stuff is done. You’re now ready to paint your surfboard

Step 4: Planning for your next surfboard project doesn’t have to be so extensive and in depth that it leaves you feeling overwhelmed or underprepared. It can be as easy as getting a photo from Instagram of a surfboard paint job that you liked and trying to replicate the image to the best of your ability. You may decide to use a pencil to outline the drawing or graphics to help with space awareness. A very popular option is to complete a Google search and print off something you may like for tracing on the board e.g. Mandala silhouette. Some surfers tend to just do what feels right and just start painting! This is an awesome way to express yourself and thankfully Surfpaints paint pens are acrylic water based markers so they can be easily removed if you make a mistake.

Step 5: Shake the paint pen to allow the ball inside pen barrel to mix paint. Prime and test paint pens by pressing down on test paper to fill the nib with paint. Once the pen has a clear line and flow on test paper, then it is ready for applying to surfboard. If the paint flows less freely during application, then re-prime pen on test paper. Place the pen cap on after use to avoid drying out the nib. Paint is permanent on porous surfaces such as surf leashes and removable on non-porous surfaces such as fiberglass. A varnish spray is required over fiberglass and other non-porous surfaces in order to prevent paint rubbing off. Please see Step 6 for applying a varnish spray.

Step 6: This step is very important. The common mistakes are not applying enough coats for sealing the paint from scratching off or not using the right clear spray. The clear coat needs to be an acrylic varnish spray paint. Acrylic paint is a non-toxic, water based paint, that dries fast and works best on surfboards. Other paints like enamel are generally oil based and designed for indoor use which can crack the paint and turn a surfboard yellow over time.

Surfpaints recommends a clear acrylic “gloss” varnish spray. Gloss varnish spray works really well with getting the most out of the colours in Surfpaints paint pens. However, if you decide to use a “Matte” or “Satin” varnish spray then this is absolutely fine. A good way to see what varnish spray effect will work best for your design is to use a broken or old board that you don’t mind testing out with some practice sprays to get an idea of how it looks when dried.

Unfortunately, due to strict National regulations on the transport of Dangerous Goods in Australia, we are unable to sell varnish spray paint online because it is considered a “Dangerous Good”. Below is a list from 3 popular outlets of acrylic varnish spray paints. Surfpaints recommends the below to use for sealing your art with Surfpaints paint pens. However, other acrylic clear varnish spray paints should also work fine .

– Bunnings: White Knight Crystal Clear Acrylic 310G Gloss Spray Paint OR Dulux Duramax 325g Gloss Clear Spray Paint (also available in Satin and Matte).
– Super Cheap Auto: SCA Acrylic Aerosol Paint – Clear, 400g.
– Spotlight: Krylon Crystal Gloss Clear (also available in Satin & Matte).

Ensure your artwork has had time to dry (at least 30 minutes). Spray at least 3 coats of clear spray paint over your artwork. The first 2 coats should be very light coats and allow 10 minutes in between each coat to settle. The 3rd coat should act as a heavier coat by holding the spray nozzle down longer and using in a machine like motion over the art work. It is important not to saturate your art piece with spray paint as this causes bubbles and cloudiness. It’s better to do quick, light coats than 1 or 2 heavy thick coats.

Allow 24 hours for the clear coat to fully set and seal the paint work. A good way to test if the surfboard is sealed is to lightly rub your fingers over the board and make sure there is no smudging or paint peeling off. If there are some spots that are smudging, then you will need to touch up again with the paint pens and apply more clear spray to the affected area.

Once you are happy with the sealing of your artwork the board is ready to surf!

If you make a mistake:
You don’t always need chemicals to remove Surfpaints paint pens! Please follow the below steps if you are required to remove paint at any stage of an art project.

– If it is a minor mistake, then try go over the area again once the paint has dried
– If the paint is wet, then simply wipe away with a rag or paper towel until it has disappeared. Sometimes you will see a smudge mark left which may require a light rub using steel wool.
– If the paint is dry, then use steel wool to remove the paint.
– If the paint has been clear coat sprayed, then sand back the clear coat and artwork using 120 – 180 grit sand paper.

Soft top boards and bodyboards:
These boards can be painted with Surfpaints paint pens. The bottom of a soft top surfboard and bodyboard generally have a plastic slick surface which allows pens to apply freely and can be sealed with an acrylic clear coat varnish spray (Follow how to paint a surfboard steps above).

However, the top of soft top boards consists of a spongy foam like substance filled with air pockets. Surfpaints have trialed with this for a couple of years now and have found that the pens go on smoothly but it is very hard to seal the paint with a clear coat varnish spray, which means it will come off eventually in the water. The main reason the paint can’t be sealed is because once you press down on a soft top board it will break the dry clear spray which will crack the paint and come off. Some soft top boards adhere better than others and can last longer with a clear spray. However, Surfpaints do not recommend painting on the TOP of a soft top surfboard or bodyboard because it will not seal and therefore not be a permanent art piece on your surfboard.

X